Services PV Pictures

This is a small excerpt from our successfully completed photovoltaic solar coating projects. In the years 2010 to 2017 alone in the subsequent treatments (after shoring) about 45 MW were treated with our method. Added to this are the serial coating projects.

See on this page:

1. Reference images while working on existing systems after installation

2. Reference images while working on new series modules before installation

3. Measurement records of reference and test equipment from our customers to prove performance improvement

4. DIN standards and test scenarios for our technology

5. Our technology has been tested by the following independent, external institutes

1. Reference images while working on existing systems after installation

	Name: Installation Geflügelmasthof 1 City: County Bad Segeberg Size: 300 kWp Manufacturer: Suntech Specials: --
	Name: Installation Geflügelmasthof 2 City: County Parchim Size: 750 kWp Manufacturer: Sovello & BP Solar Specials: --
	Name: Installation Schweinemasthof City: County Segeberg Size: 350 kWp Manufacturer: Sharp Specials: --
	Name: Tierzucht Halle 4, Halle 5, Halle 6, Halle 7 City: County Brandenburg Size: 300,04 kWp Manufacturer: Schott Specials: --
	Name: Free Field Plant Napoli Italia City: County Italy, near Napoli Size: 921,6 KWp Manufacturer: SolarWorld Specials: --
	Name: Installation Halle 2 Satteldachhalle City: County Bad Segeberg Size: 75 kWp Manufacturer: Sharp, Samsung Specials: --
	Name: Pultdachhallen France City: County Frankreich Size: 5100 kWp (5,1 MW) Manufacturer: Suntech Specials: --
	Name: Installation Gewerbehallen Central City: County Schwerin Size: 1343 kWp (1,3 MWp) Manufacturer: Mono und Poly von Sunclass Specials: --
	Name: Installation Mastanlage City: County Frankfurt/Oder Size: 2300 kWp (2,3 MW) Manufacturer: Luxor Solar Specials: --
2. Reference images while working on new series modules before installation
	Name: Freiflächenanlage Bobitz City: County Nordwestmecklenburg Size: 4800 kWp (4,8 MW) Manufacturer: Runner Solar Specials: Seriell-Applikation by automatic self constructed coatingmaschine
	Name: Serienbeschichtung Axsun City: Coating in our factory before shoring Size: 1000 kWp (1 MW) Manufacturer: Axsun Solar Specials: serial application with automatic coating machine
	Name: Serienbeschichtung AlexSolar City: Coating in the solar park before shoring Size: 1800 kWp (1,8 MW) Manufacturer: Alex Solar Specials: Serial application with automatic coating machine installed in a mobile container
	Company Nehlsen in 2018: Even after 5 years of coverage time of the solar coating, still with perfect results. So good that the customer still likes to recommend us today. Press release from 2013 here in the appendix.
	From "old" make "new" ...... nanoproofed Special cleaning process for PV modules with heavily burnt-in soiling. nanoproofed has developed a process that can be used to rebuild solar modules with heavily baked-on soiling. The result is an optimized earnings situation, which corresponds to the new condition. The procedure was tested by a "Mobile Flasher" from an external, independent testing company, the company Suncycle GmbH from Hamburg. Here you can see First-Solar modules that have been tested with this method in cooperation with "juwi Operations & Maintenance GmbH". With best results and to the fullest customer satisfaction of the company julist GmbH & Co. KG. Further information on request.
3. Measurement records of reference and test equipment of our customers to prove the performance increase (small excerpt)
	Unbeatable: 90% "return" in 4 years on your investment in your own PV solar system The latest values from our customer EWS GmbH & Co. KG unbeatable. 90% return in 4 years to invest in your own photovoltaic system. The test plant invested € 2,900 for the coating, carried out by the team of nanoproofed GmbH with the nanoproofed Solar Photokat coating. Coating was in May 2014. From May 2014 to May 2016, the investment in the nanoproofed SolarPhotokat coating alone returned the investment of € 2,900. From May 2016 to May 2018 an additional € 2,795.22 was generated. So altogether 5,710.92 € through the nanoproofed Solar Photokat coating. Result: Anyone who owns a PV system by Netzgang before 2012 and has not been coated so far, can escape a lot of income. All data can be proved with real numbers and real references with contact details of the partners. Just ask us! Also to be found on Facebook: https://www.facebook.com/nanoproofed/photos/a.194139860610364/1941382562552743/?type=3&theater
	Evaluation of a 5.2 MW turbine from France by Krannich Solar GmbH and Co.KG at the German border. Result: 8% performance increase And once again it shows that the solar and photovoltaic coating from nanoproofed, the promised performance increases and in PV systems, the investment is profitable after 2-3 years, and the investment through the increase in performance, is balanced and then generated additional revenue , Results summarized: The plant parts left to us for processing ran from the beginning 2% to 16% worse and had 2 - 16% less yield thereby. We have caught these differences, and vice versa, therefore, increasing the performance of e.g. October 2015 to October 2016 of 5-8%. In July 2017, the non-coated part of the plant was cleaned and the values have not changed significantly. Therefore, one can assume a pollution level of about 1-2%. After cleaning, it can be clearly seen that the coated part of the system, due to the self-cleaning effect, resembles the parts of the system. This demonstrates the self-cleaning effect. It is again about 6% between July 2017 and December 2017. See picture in appendix or you can simply send the complete evaluation. Just a short message to us and then you get the corresponding evaluations, information and contact details by mail. Also to be found on Facebook: https://www.facebook.com/nanoproofed/photos/a.194139860610364/1929245963766403/?type=3&theater
	Another current evaluation of a PV system from RSI Rottaler Solar Invest GmbH with our "nanoproofed protection Solar Photokat" coating. Up to 9% increase in performance compared to uncoated equipment. Results summarized: The parts of the equipment left to us for processing ran from 2% to 8% worse from the beginning and had 2 - 8% less yield thereby. We have caught these differences, and vice versa, therefore, increasing the performance of e.g. August 2016 to August 2017 by 6-9% In September / October 2017, the non-coated part of the plant was cleaned and the values have shifted again. Therefore, one can assume a pollution level of about 5-9%. After cleaning, it can be clearly seen that the coated part of the system, due to the self-cleaning effect, resembles the parts of the system. As a result, the Selbstreinigunsgeffekt is detected. Between November 2017 and May 2018 it is now again 5-9% See picture in appendix or you can simply send the complete evaluation. Just a short message to us and then you get the corresponding evaluations, information and contact details by mail. Also to be found on Facebook: https://www.facebook.com/nanoproofed/photos/a.194139860610364/1923246037699729/?type=3&theater
	Another evaluation, another PV open space plant from juwi Operations & Maintenance GmbH with our "nanoproofed protection Solar Photokat" coating. 7.5% increase in performance compared to uncoated equipment. Results summarized: The plant parts of an open-space plant which were handed over to us for processing were handed over to us for processing on 17.05.2013. To date, the increase in performance is of course available. Evaluations are carried out by JUWI itself. So far, with best results of 7.5% performance increase on average over the complete years and not just for a few months. See picture in appendix or you can simply send the complete evaluation. Just a short message to us and then you get the corresponding evaluations, information and contact details by mail.
4. DIN standards and test scenarios to prove the function of our technology
DIN EN 1096-5: 2016	Determination of the self-cleaning behavior of coated glass surfaces
DIN 52980 / ISO 10678	Determination of photocatalytic activity by degradation of methylene blue
ISO 27448	Determination of the photocatalytic activity by measuring the contact angle
IEC 61215	Humidity / heat test, UV test, temperature change test, humidity / frost test, hail test, all passed!
IEC 61701	Salt mist corrosion protection test, passed without problems!
ISO 15184	Pencil hardness, passed without problems!
ISO 2409	Cross cut test, passed without problems!
5. Our technology has been tested by the following independent, external institutes: - CAN Hamburg (Center of Applied Nanotechnology) - SGS Institut Fresenius GmbH - Institut Fraunhofer IST - Por-Lab, Porphyrin-Laboratories GmbH - Christian Albrechts Universität zu Kiel

Category: PV Pictures